Turbine oil


                                                                  OST 38.01163-78

Product description:

      Widely used petroleum based oil with a set of highly effective additives. It is produced from West Siberian and a mixture of West Siberian and Ural oils. Oil MS-8p is designed to replace MK-8 and MK-8p oils, and it significantly exceeds them in a number of performance characteristics (thermal oxidation stability, low temperature viscosity, service life).


        It is used for gas turbine engines of subsonic and supersonic aircrafts, whose oil temperature at the exit of the engine is not more than 150°С. It is also used in oil mixtures with MS-20 aircraft oil (in ratio of 25:75, 50:50, 75:25) in turboprop engines and for conservation of aircraft engine oil systems.
       This oil is also used in ship gas turbine units and in gas-pumping units.


Characteristics of the oil:

Kinematic viscosity, mm2/s, at temperature:

50°C, not less than

- 40°С, not more than




Temperature, °С:

Flash point in a closed cup, not lower than

Pour point, not higher than




Acid number, mg KOH/g, not more than 


Contents of water-soluble acids, alkalis, water, mechanical impurities


Thermo-oxidative stability of 50 hours at a temperature of 150°C:

Indicators after oxidation:

Kinematic viscosity, mm2/s, not more than, at temperature:


- 40°С

Acid number mg KOH/g, not more than

Mass fraction of precipitate insoluble in isooctane %, not more than

Corrosion on plates, mg/cm2, not more than:

Steel SHKH15

Copper M1 and M2

Aluminum alloy AK4












Density at 20°С, kg/m3, not more than


Tribological characteristics on the FBM at (20 ± 5°С):

Critical load (Pk), kgf, not less than

Wear indicator (Di) at axial load of 20 kgf, mm, not more than




Warranty period of storage is 5 years from the date of manufacture.



The barrel is 178 kg.



Company benefits

  • Individual approach to each client.

  • For us, good relationships are more important than immediate benefits.

  • High quality of manufactured products.

  • We are ready to develop necessary production together with our client and put it on manufacture in case of absence of such in our assortment.

  • Providing qualified advice by our technologists.

  • Promptness of order execution.

  • Constant quality control of basic and manufactured products.

  • Production delivery by our company can be carried out as own transport of the company and any convenient way for you (including self-delivery by your enterprise).


Scheme of work

  • 1. Call or e-mail

  • 2. Providing an advice if necessary

  • 3. Receipt of invoice

  • 4. Payment of goods

  • 5. Shipping by any means convenient for you